Take you to understand the operation rules of CPU pouring machine?

 CPUWhen using the casting machine, it must be operated in the correct way, otherwise it will seriously damage the equipment. Next, let's talk about the operating procedures for everyone. If you also want to know, then read on. Maybe it will really help you later.

CPUThe pouring machine is the same as other equipment during operation. Of course, there are many things to pay attention to in the whole process, which must be paid attention. The first thing we need to know is that we are using it.CPUBefore the casting machine, it is necessary to check whether the electrical instruments, gas lines, valves, etc. of the equipment are normal, and whether common tools such as crowbars and hammers are ready for inspection. Bleed out the water in the compressed air bag. Then, when placing the core, the mold is not allowed to be closed before the hand leaves. This is very important. I hope everyone will pay attention to it. And the purpose of this is to prevent crushing injuries. When two people operateCPUWhen pouring the machine, we must concentrate, cooperate with each other and take care of each other. Generally speaking, it is mainly pouring good castings should be stacked neatly and smoothly. Stacking height should be moderate, and pay attention to leaving pedestrian passage. Other than that, use.CPUWhen pouring the machine, it should also be noted that when there is a core head, the core plate is damaged or the mold is not tightly closed, pouring is not allowed at this time. When the mold is closed and poured,CPUNo one shall stand in front of the pouring machine to avoid running fire and scalding. However, if there is a serious fire and other emergencies, should immediately deflate, cut off the power supply. The metal liquid flowing out of the fire should be handled in time.

Therefore, it is used.CPUThere are still many things to pay attention to when pouring the machine, and every operator must understand and master them. Also, what we need to know here isCPUThe casting machine shall comply with the safety operation regulations for hook workers during lifting. Before using the wire rope, check whether there is any damage, and hang the hook firmly before lifting. The next thing to do is to use the funnel, fast thermometer, thermocouple paint, etc. after drying. And after the completion of the work, the valves should be closed, cut off the power supply of the equipment, and clean up the work site. If you encounter other problems, you must stop the operation and consult the manufacturer. Our company is a development, production and sales of polyurethane equipment manufacturers. Since its establishment, it has been constantly absorbing foreign advanced technology and design concepts. Combined with the actual situation in China, it has formed a polyurethane elastomer pouring machine, a soft and hard foaming machine, a sealing strip foaming machine, a sealing strip automatic pouring machine, a polyurethane shoe sole forming pouring machine, a tire foaming machine, a high-temperature elastomer pouring machine,CPUCasting machine, polyurethane low pressure foaming machine,PUFoaming machine, polyurethane shoe machine and load-bearing production line and other major series of polyurethane equipment, so there are many types of products, I believe there is always a suitable for you. Also by the majority of users favor and praise.

AboutCPUThe operation rules of the pouring machine are here for everyone. If you have time, you can have a good understanding. AboutCPUOther knowledge points of the casting machine will continue to be updated in the next period. Remember to pay more attention to the website so as not to miss the wonderful content.